We are always in touch and will be happy to answer any of your questions
+ 48 800 800 688
biuro@beltermo.eu
Beltermo.eu
All rights reserved.
- natural fibres from coniferous wood
- polyurethane-based resin MDI (4%)
Recommended for interior insulation of exterior walls and partitions of interior walls.
Possible insulation of ceilings, ceilings and floors.
During transportation and storage of slabs, it is necessary to ensure their protection from mechanical damage and moisture. Storage of pallets with a slabs is carried out indoors on a flat surface, isolated from the ground, under a canopy that protects the thermal insulation slabs made of wood fiber from the effects of precipitation and sunlight.
It is NOT ALLOWED to load slabs in bulk and unload them by dropping them.
Stacking pallets with slabs on top of each other is allowed, no more than two levels.
Edge profile : straight or stepped
Length: 1000 – 2850 mm
Width : 575 – 600 mm
Thickness: 20-160 mm
Density : ok. 190 kg/m3
The nominal value of the coefficient of thermal conductivity : 0,042 λD [W/m*K]
Compressive strength : 100 kPa
Tensile strength : 7,5 kPa
Fire resistance. Euroclass according to EN 13501 : E
Nasz manager skontaktuje się z Tobą
Mówimy po polsku, angielsku i rosyjsku.
- natural fibres from coniferous wood
- Two-component bonding polymer (6-9%)
-ammonium polyphosphate (flame retardant) (8-9%)
Flexible slab.
Recommended for insulating the space between rafters, as well as structures of frame and frame-panel houses and partitions.
Store and lay slabs in dry conditions;
In roof and floor structures, protect the panels from accidental fall.
Edge profile : straight
Width : 1200 x 600, 1200 x 580 mm
Thickness : 40, 60, 80, 100, 120, 140, 160, 180, 200, 220, 240 mm
Length: 1200 mm
Maximum width/minimum width: 600/580 mm
Density: 50 kg/m3
The coefficient of thermal conductivity : 0,038 λD [W/m*K]
Thermal resistance: 1,05; 1,58; 2,11; 2,63; 3,16; 3,68; 4,21; 4,74; 5,26; 5,79; 6,32 RD, [m2K/W]
Water vapor diffusion resistance coefficient: : 0,5 µ
Level of airflow resistance: 5 [(kPa*s)/m3]
Proper heat capacity: 2100 [J/(kg*K)]
Fire resistance. Euroclass according to EN 13501 : E
- natural fibers from coniferous wood
- polyurethane-based resin MDI (4%)
- paraffin emulsion (1.5%)
Moisture resistant slabs.
Recommended for external roof insulation and for insulation of external walls under protective covering.
There is a possibility of insulating the floor from the inside under the jointless floors (laminate, panel parquet), insulating the external walls and internal walls under the elevation cladding.
Edge profile : straight
Length: 1000 – 2800 mm
Width: 575 – 600 mm
Thickness : 20-160 mm
Density : ok. 180 kg/m3
The coefficient of thermal conductivity : 0,042 λD [W/m*K]
Compressive strength : 150 kPa
Tensile strength : 10 kPa
Short-term water absorption: : ≤ 1 kg/m2
Fire resistance. Euroclass according to EN 13501 : E
- natural fibres from coniferous wood
- polyurethane-based resin MDI (4%)
Recommended for internal insulation of external walls and ceilings.
During transportation and storage of slabs, it is necessary to ensure their protection from mechanical damage and moisture. Storage of pallets with a slabs is carried out indoors on a flat surface, isolated from the ground, under a canopy that protects the thermal insulation slabs made of wood fiber from the effects of precipitation and sunlight.
It is NOT ALLOWED to load slabs in bulk and unload them by dropping them.
Stacking pallets with slabs on top of each other is allowed, no more than two levels.
Edge profile : straight
Length: 1000 – 1250 mm
Width: 575 – 600 mm
Thickness: 20 – 160 mm
Density: ok. 150 kg/m3
The coefficient of thermal conductivity : 0,040 λD [W/m*K]
Compressive strength : 100 kPa
Tensile strength : 7,5 kPa
Fire resistance. Euroclass according to EN 13501 : E
- natural fibres from coniferous wood
- polyurethane-based resin MDI (4%)
Recommended for internal insulation of all types of roof structures, floors, ceilings, external and partition walls.
During transportation and storage of slabs, it is necessary to ensure their protection from mechanical damage and moisture. Storage of pallets with a slabs is carried out indoors on a flat surface, isolated from the ground, under a canopy that protects the thermal insulation slabs made of wood fiber from the effects of precipitation and sunlight.
It is NOT ALLOWED to load slabs in bulk and unload them by dropping them.
Stacking pallets with slabs on top of each other is allowed, no more than two levels.
Edge profile : straight
Length: 1000 – 1250 mm
Width: 575 – 600 mm
Thickness : 30 – 200 mm
Density : ok. 130 kg/m3
The coefficient of thermal conductivity : 0,038 λD [W/m*K]
Compressive strength : 60 kPa
Tensile strength : 5 kPa
Fire resistance. Euroclass according to EN 13501: E
- natural fibres from coniferous wood
- polyurethane-based resin MDI (4%)
- paraffin emulsion (1.5%)
Moisture resistant slabs.
Recommended for external and internal insulation of roofs and external insulation of external walls under protective covering.
Internal insulation of external walls, as well as structures of frame and frame-panel houses is possible.
Edge profile : straight
Length : 1000 – 1250 mm
Width : 575 – 600 mm
Thickness : 40 – 240 mm
Density : ok. 110 kg/m3
The coefficient of thermal conductivity : 0,038 λD [W/m*K]
Compressive strength : 60 kPa
Tensile strength : 5 kPa
Short-term water absorption: ≤ 2 kg/m2
Fire resistance. Euroclass according to EN 13501 : E
Edge profile : stepped
Length : 1000 – 1250 mm
Width : 575 – 600 mm
Thickness : 100 – 240 mm
Density : ok. 110 kg/m3
Thermal conductivity coefficient: 0,038 λD [W/m*K]
Compressive strength : 60 kPa
Tensile strength : 5 kPa
Short-term water absorption: : ≤ 2 kg/m2
Fire resistance. Euroclass according to EN 13501 : E
- natural fibres from coniferous wood
- polyurethane-based resin MDI (4%)
Recommended for internal insulation of external walls and partitions of internal walls.
Isolation of ceilings, ceilings and floors possible.
During transportation and storage of slabs, it is necessary to ensure their protection from mechanical damage and moisture. Storage of pallets with a slabs is carried out indoors on a flat surface, isolated from the ground, under a canopy that protects the thermal insulation slabs made of wood fiber from the effects of precipitation and sunlight.
It is NOT ALLOWED to load slabs in bulk and unload them by dropping them.
Stacking pallets with slabs on top of each other is allowed, no more than two levels. The boards should be laid tightly next to each other to eliminate thermal bridges;
Edge profile : straight or stepped
Length : 1000 – 1250 mm
Width: 575 – 600 mm
Thickness : 30 – 180 mm
Density : ok. 140 kg/m3
The coefficient of thermal conductivity : 0,039 λD [W/m*K]
Compressive strength : 80 kPa
Tensile strength: 5 kPa
Fire resistance. Euroclass according to EN 13501: E
- natural fibres from coniferous wood
- polyurethane-based resin MDI (4%)
Recommended for insulating screed floors (laminate, panel board).
Internal insulation of floors, external walls and partitions possible.
Edge profile: straight
Length: 1000 – 1250 mm
Width: 575 – 600 mm
Thickness: 20 – 160 mm
Density: ok. 140 kg/m3
The coefficient of thermal conductivity : 0,041 λD [W/m*K]
Compressive strength : 100 kPa
Tensile strength : 7,5 kPa
Fire resistance. Euroclass according to EN 13501: E
- natural fibres from coniferous wood
- polyurethane-based resin MDI (4%)
- paraffin emulsion (1,5%)
Moisture resistant slabs.
Recommended for external roof insulation and external wall insulation under a protective coating.
Internal insulation of the floor under the screed (laminate, panel parquet) is possible.
Edge profile : straight, tongue, groove or stepped
Length: 1000 – 2800 mm
Width: 600 mm
Thickness: 20 – 60 mm
Density: ok. 200 kg/m3
The coefficient of thermal conductivity: 0,042 λD [W/m*K]
Compressive strength : 150 kPa
Tensile strength : 15 kPa
Short-term water absorption: ≤ 1 kg/m2
Fire resistance. Euroclass according to EN 13501: E
- natural fibres from coniferous wood
- polyurethane-based resin MDI (4%)
- paraffin emulsion (1,5%)
Moisture resistant slabs.
Recommended for exterior roof insulation, attic floor insulation on a level surface.
Can be used as exterior insulation under ventilated facade cladding and as exterior wall and floor insulation.
Edge profile: straight
Length: 1000 – 1250 mm
Width: 575 – 600 mm
Thickness: 30 – 180 mm
Density: ok. 140 kg/m3
The coefficient of thermal conductivity: 0,039 λD [W/m*K]
Compressive strength: 80 kPa
Tensile strength: 5 kPa
Short-term water absorption: ≤ 1 kg/m2
Fire resistance. Euroclass according to EN 13501: E
